Home » Beading Patterns » Patterns Free » Sharazade Team 1 Design & Bead-a-long 2020 (free pattern)

Design & Bead-a-long “Sharazade"

Team 1 (Sunshine DeLite)

Designers of this team are:

Debbie Bourgeois

Kerstin Kallin

Rangashrii Santhanam

Esther Wijma

Cora Sparidaans

Carine Smedinga

 

How it works?? 

- Every person is going to design 1 step of the earrings. 
- Person number one will start using rivoli 14mm and designs step 1 of the pattern (which I will write after person 1 finishes and tells me what to do, how much and which materials are used)
- Person number 2 makes step 1 and designs step 2 (I will add this step 2 to the pattern)
- Etc. untill we finish the earrings (we have made an earring pattern which will be free available for everybody to make)
- During this, everyone is free to bead-a-long with us. It will be step by step free available here.
- There is no material list out front available except you will need 2 pieces of Rivoli 14mm.
- This is a basic idea so not all the details are set. We will make them up as we go along.

And of course we will need a name for this project.... this will be “Sharazade” the name is made up by Dyanne van Duppen it’s a combination of “Share” and “Sherazade” (a storyteller) thanks so much Dyanne for this beautiful name!

Hope you like it and want to join me. Designing or beading along.

There a a lot of people who wanted to design with me so I have made 3 groups. If you want you can happily bead-a-long with all the groups.

Take a look at Team 2

Take a look at Team 3


Material list: 

- 2 Rivoli 14mm

- 2 Rivoli 12 mm

- 2 Chaton 8mm

- Miyuki Seedbeads 11/0

- Miyuki Seedbeads 15/0

- Miyuki Seedbeads 15/0A

- Fire polish 3mm

- Swarovski Bicone 3mm


Are you joining??


Instructions Part 1 By Debbie Bourgeois

Bezel the 14mm rivoli

1.1 Pickup 3xSB11. Go through the beads this makes a circle.

1.2 Pick up 2xSB11. Go through the next SB11, repeat the entire round. (add 6SB11 in this round)

1.3 Pick up 1xSB11. Go through the next SB11, repeat the entire round. (add 6SB11 in this round)

1.4 Pick up 2xSB11. Go through the next SB11, repeat the entire round. (add 12SB11 in this round). Exit between 2SB11.

1.5 Pick up 1xSB11. Go through the next SB11, repeat the entire round. (add 12SB11 in this round)

1.6 Pick up 1xSB11. Go through the next SB11. Pick up 2xSB11. Go through the next SB11. (add 18SB11 in this round). Exit between 2SB11.

1.7 Pick up 1xSB11. Go through the next SB11. Repeat the entire round. (add 18SB11 in this round.

1.8 Pick up 1xSB15. Go through the next SB11. Repeat the entire round. (add 18SB15 in this round. Exit a SB15.

1.9 Pick up 3xSB15 go through the same SB15 this makes a circle. Go through the next SB11, SB15 and SB11. Exit the next SB15. Repeat this the entire round. Exit a SB15 at the point.

1.10 Pick up 2xSB11 Go through the next SB15 point. Repeat the entire round. Put in the RIV14 and go through the thread path one more time and pull tight.


Instructions Part 2 by Kerstin Kallin

2.1 Exit a SB15 added in step 1.8. (see drawing 1.10) Pick up 3xSB11 go through the same SB15. This makes a circle.

2.2. Pickup 1xSB15, 1xFP3 and 1xSB15 go through the next SB15 (of step 1.8)

2.3 Pickup 1xBIC3, 1xSB15 and 1xBIC3 and go through the next SB15 (of step 1.8)

2.4 Repeat step 2.2 and 2.3 the entire round.


Instructions Part 3 by Rangashrii Santhanam

Bezel the 12mm rivoli

3.1 Pickup 1xSB15, 1xFP3, 1xSB15, 1xFP3, 1xSB15, 1xFP3, 1xSB15, 1xFP3, 1xSB15, 1xFP3, 1xSB15, 1xFP3, 1xSB15, 1xFP3, 1xSB15 and 1xFP3. Tie a knot with the tail. Exit a SB15.

3.2 Pickup 3xSB15A, 1xSB15 and 3xSB15A go through the next SB15 of the base ring. Repeat this the entire round and exit the SB15 in the middle.

3.3 Pickup 1xSB15, 1xSB15A and 1xSB15 go through the next middle SB15 made in step 3.2 Repeat this the entire round.

3.4  Put in the RIV12 (face down) go through the thread path one more time. Exit the SB15A in the middle added in step 3.3.

3.5 Pickup 2xSB15A, 1xSB15 and 2xSB15A go through the 3rd SB15A (skip one SB15A) Repeat this the entire round. Skip the 2nd, 4th, 6th and 8th SB15A. Go through the square thread path.


Instructions Part 4 by Esther Wijma

4.1 Continue with the RIV14. Exit the SB15 on the left of the FP3 on the right on top.

4.2 Pickup 2xSB15, 1x SB15A, 2xSB15. Skip the FP3 and go through the next 2SB15 and exit the first BIC3. Pickup 1xSB15, 1xSB11A and 1xSB15 go through the next 2SB15.

4.3 Repeat step 4.2 the entire round. Exit the SB15A at the bottom.

4.4 Connecting the RIV14 and RIV 12. Pickup 1xSB11 go through the FP3 of the RIV12. Pickup 1xSB11 go through the SB15A of the RIV14. Turn your work.

4.5 Pickup 1xSB11. Go through the 3rd SB15A of the RIV12 (front to back) go through the SB11 and go through the 4th SB15A of the RIV12 (back to front). Pick up 1xSB11 and go through the SB15A of the RIV14. If necessary go through tread path again.


Instructions Part 5 by Cora Sparidaans

Bezel th chaton 8mm

5.1 Pickup 1xFP3, 1xSB11, 1xFP3, 1xSB11, 1xFP3, 1xSB11, 1xFP3, 1xSB11, 1xFP3, 1xSB11, 1xFP3 and 1xSB11. Tie a knot with the tail. Exit a SB11.

5.2 Pickup 3xSB11 and go through the SB11 this makes a circle. Repeat this the entire round. Exit a middle SB11 (see drawing)

5.3 Pickup 2xSB15 go through the next middle SB11 added in step 5.2. Repeat this the entire round. 

5.4 Put in the CH8 (back towards the FP3) Go through the SB11 and SB15. Exit a SB11 at the back (step 5.1) Pick up 4xSB11 and go through the 3rd SB11. Pick up 4xSB11 and go through the 5th SB11. Pick up 4xSB11 and go through the 1st SB11. Exit a SB11 at the front.

(Optional Step)

5.5 Pickup 1xSB15, 1xFP3 and 1xSB15. Go through the next SB11. Pickup 1xBIC3, 1xSB15 and 1xBIC3 go through the next SB11.

5.6 Repeat step 5.5 the entire round.  


Instructions Part 6 by Carine Smedinga

6.1 Exit from one of the SB11 in step 5.2 this is your base: pick up 4xSB15B and sew through the first 2 beads. This makes a circle.

B: Pick up 3xSB15B and sew through the first SB15A of the base AND go through the following SB15B (the 2nd) of the base.

C: Pick up 2xSB15B and sew through the SB15B of step 2 AND sew through the second SB15B of the base. Exiting the following SB15B (the 3rd) of the base.

D: Pick up 2xSB15B and sew through the SB15B of step 3 AND sew through the SB15B (the 3rd) of the base. Sew through the following SB15B (the 4th, last) of the base. Exiting the SB15B of step 2.

E: Pick up 1xSB15B and sew through the SB15B of step 4 AND go through the SB15B (4th) of the base. Exiting the SB15B of step 4.

F: Upperview: Sew through the 4SB15B the Cubic RAW is finished.

 

Repeat step B till F till you have made 12 cubes.

6.2 Now attach the strip to the RIV14 with a cube made with SB15B. Use the 4 beads (3SB15 and 1SB11) in between the BIC3 (close up in the square) if you push the SB11 to the back the 4 beads can be used as a top.

6.3 Repeat step 6.1 and 6.2 also at the other side.

6.4 Attach the chaton to the 12mm Rivoli: Exit the SB11 at the top. Pick up 1xSB15B, 1xSB11 and 1xSB15B go through the FP3. Pick up 1xSB15B go through the SB11. Pick up 1xSB15B and go through the SB11 at the top of the chaton. Repeat this also at the back replace the SB11 in the middle by a BIC3.

6.5 Bead through some more beads, while making single knots, to secure the thread, and cut it.


Add comment

Comments

Anita BARNIVILLE
2 months ago

Thank you so much 💕

Christine Overberg
2 months ago

i have just discovered you 5/6/2020 so will look forward to beading along!! I am in Dallas, TX, USA!!